• +349 369 401 18
  • +349 369 401 18
  • Buscar en todas las categorías
  • Discounts
  • Ordenadores
  • Teléfonos móviles
  • Tabletas
  • Electrodomésticos
  • Plomería
  • Equipos de Foto y Video
  • GoPro
  • Relojes
  • Televisión, audio, vídeo
  • Videoconsolas y juegos
  • Coche/Moto
  • Equipo de protección personal
  • Hogar & Jardín
  • Muebles
  • Deporte y Turismo
  • Niños y bebes
  • Productos para mascotas
  • Joyería
  • Perfumes y cosmeticos
  • Neapstrādātās preces
Catálogo de productos
0 unid. 0.00
26%
Comparar artículo
MTX TR275 Amplifier
Artículo: 149834
Número de canales2
MarcaMTX
En stock: 1
120.00 89.00
total:
89.00
+
-

The MTX TR275 amp is powerful and flexible. It can power 2 loudspeakers (2Ω ~ 8Ω) of large diameters in the front, rear doors or on the deck. It shines with its legendary dynamics and exceptional musicality. It has nothing to do with the microscopic amplifiers without switching power supply that equip car radios ... In bridged mode (Bridge), it is capable of feeding a subwoofer or a 4Ω subwoofer. Its variable active filter allows it to be extremely precise: 12dB / oct high pass or variable low pass from 50 to 120Hz. If you don't know where to start adjusting the active filter, the potentiometer is equipped with an 80Hz "click" position. You can not be wrong. To avoid interference problems, we have equipped the TR275 with balanced inputs. They perfectly isolate the audio ground of the amp so that it does not mix with the noisy ground of the power supply. This is a powerful technique that is usually found on very high end amps. If your car radio is not equipped with RCA outputs, you can connect the TR275 to the high level inputs. All you need to do is connect the HP cables directly to the high level input of the amplifier. Simple and very practical. If you need it, the MTX EBC-1 remote control is available as an option. It can allow you to adjust the level of the subwoofer with a simple analog knob, sitting in the front seat. Finally, its design and construction are of remarkable quality. Its all-aluminum chassis is the same as that of the prestigious MTX TX6500D and TX81000D amps. We don't skimp on quality at MTX...

Features

• Wide range Class-AB amplifier for 2Ω~4Ω speakers and 4Ω subwoofer
• Bridged mode possible to amplify one 4Ω subwoofer or one 4Ω enclosure
• Optimized for 2Ω in stereo and 4Ω in mono
• Active x-over @80Hz 12dB/Oct high pass (speakers) or low pass (subwoofer)
• All aluminum construction
• Optimal use with RTE12AS, RTE12AV, RTF10AS, RTT12AV, TR12AV, RT12AV
• Optimal use with TR, TX2 or TX4 speakers
• Optional EBC remote control (under the reference EBC-1)

Specifications

• 2-channel Class-AB wide range amplifier
• CEA2006 certified power:
- 2x110W RMS @ 2Ω and THD + N ≤1%
- 2x75W RMS @ 4Ω and THD + N ≤1%
- 1x220W RMS bridged @ 4Ω and THD + N ≤1%
• Active x-over:
- High Pass (HPF) 12dB/oct @80Hz
- Low Pass (LPF) 12dB/oct @80Hz
• Signal / noise ratio (1 Watt):> 74dB
• THD + Noise (Distortion) (1 Watt): ≤ 0.18%
• Frequency response (± 1dB): 10Hz-60000Hz
• Sensitivity level: 200mV to 6V
• Dimensions: 180x135x52mm
• Low-level (RCA) and high-level (speakers) inputs
• Optional EBC remote control (ref: EBC-1)

Parametros generales

Marca MTX

Sonido

Número de canales 2
Potencia máxima, W 220
Potencia continua, W 110
Impedancia, ohmios 2-4
Relación señal/ruido 74

Tamaño y peso

Dimensiones, mm 142x134x51
Descripción en la página de inicio del fabricante MTX

Svars

Gross weight (kg) Gross weight (kg):
Параметр вес учитывается при расчёте доставки
15

Warranty

Warranty 2 years

Puede pagar productos en bm.market de las siguientes maneras:

 

Tarjeta de crédito


pago con tarjeta de crédito en línea

 

 

Personas jurídicas / Autónomos (pago sólo por transferencia):

Transferencia bancaria - El pago se realiza sobre lo recibido previamente a su cuenta de correo electrónico. A la recepción de la mercancía adjunta factura y factura original.

 

Le enviaremos su pedido por mensajería. El coste final de su pedido lo averiguará en el registro.

_______________________________________________

Procedimiento para la devolución de mercancías y dinero en efectivo:

- Tiene derecho a rescindir el contrato en un plazo de catorce (14) días sin necesidad de justificación.

- El derecho de denegación terminará a los 14 días de la fecha en que usted o un tercero adquiera la mercancía, con excepción del transportista y la persona que usted indique, recibió la mercancía en posesión.

- Para utilizar el derecho de desistimiento, debe informarnos (por ejemplo, por correo postal o electrónico) SIA "TehEksperts", dirección Krasta iela 89, Riga, LV-1019, número de teléfono +349 36940118, dirección de correo electrónico info@bm.lv utilizando la muestra.

- Para que se respete el plazo del derecho de denegación, basta con que envíe su aviso de uso del derecho de desistimiento antes de que finalice el plazo del derecho de desistimiento.

- Si desiste del contrato, le reembolsaremos todos los pagos recibidos de usted, a su vez los gastos de transporte (excluyendo los costes adicionales que surgieron como resultado de la elección de un método de entrega), sin demoras indebidas y, en cualquier caso, a más tardar 14 días a partir de la fecha en que se nos informó sobre su decisión de desistir del contrato.

- Durante el uso del derecho de desistimiento, puede usar el producto durante el tiempo que sea necesario para verificar el producto (tal como puede hacer antes de comprar el producto en una tienda normal, por ejemplo, para computadoras portátiles, familiarizarse con la apariencia de la computadora, tamaño, pero no manipulaciones, incluida la activación de un sistema operativo preinstalado, teléfonos móviles, sin quitar películas protectoras, incluso sin insertar una tarjeta SIM y hacer llamadas, sin sincronizar datos, etc.).

- Usted es responsable de mantener la calidad y seguridad de los bienes durante el período de implementación del derecho de rechazo.

- Debe reembolsar los costos asociados con la reducción del costo de los bienes, si los bienes se usaron para otros fines, para no familiarizarse con las características y el funcionamiento de los bienes, lo que puede ser confirmado por el diagnóstico de los bienes en el centro de servicio autorizado del fabricante.

Dejar comentario

Aquí puede dejar una reseña o un comentario sobre el producto.
Para dejar una reseña, ¡tienes que estar registrado!

El comentario será revisado y solo entonces se mostrará en la página.

Descripción

The MTX TR275 amp is powerful and flexible. It can power 2 loudspeakers (2Ω ~ 8Ω) of large diameters in the front, rear doors or on the deck. It shines with its legendary dynamics and exceptional musicality. It has nothing to do with the microscopic amplifiers without switching power supply that equip car radios ... In bridged mode (Bridge), it is capable of feeding a subwoofer or a 4Ω subwoofer. Its variable active filter allows it to be extremely precise: 12dB / oct high pass or variable low pass from 50 to 120Hz. If you don't know where to start adjusting the active filter, the potentiometer is equipped with an 80Hz "click" position. You can not be wrong. To avoid interference problems, we have equipped the TR275 with balanced inputs. They perfectly isolate the audio ground of the amp so that it does not mix with the noisy ground of the power supply. This is a powerful technique that is usually found on very high end amps. If your car radio is not equipped with RCA outputs, you can connect the TR275 to the high level inputs. All you need to do is connect the HP cables directly to the high level input of the amplifier. Simple and very practical. If you need it, the MTX EBC-1 remote control is available as an option. It can allow you to adjust the level of the subwoofer with a simple analog knob, sitting in the front seat. Finally, its design and construction are of remarkable quality. Its all-aluminum chassis is the same as that of the prestigious MTX TX6500D and TX81000D amps. We don't skimp on quality at MTX...

Features

• Wide range Class-AB amplifier for 2Ω~4Ω speakers and 4Ω subwoofer
• Bridged mode possible to amplify one 4Ω subwoofer or one 4Ω enclosure
• Optimized for 2Ω in stereo and 4Ω in mono
• Active x-over @80Hz 12dB/Oct high pass (speakers) or low pass (subwoofer)
• All aluminum construction
• Optimal use with RTE12AS, RTE12AV, RTF10AS, RTT12AV, TR12AV, RT12AV
• Optimal use with TR, TX2 or TX4 speakers
• Optional EBC remote control (under the reference EBC-1)

Specifications

• 2-channel Class-AB wide range amplifier
• CEA2006 certified power:
- 2x110W RMS @ 2Ω and THD + N ≤1%
- 2x75W RMS @ 4Ω and THD + N ≤1%
- 1x220W RMS bridged @ 4Ω and THD + N ≤1%
• Active x-over:
- High Pass (HPF) 12dB/oct @80Hz
- Low Pass (LPF) 12dB/oct @80Hz
• Signal / noise ratio (1 Watt):> 74dB
• THD + Noise (Distortion) (1 Watt): ≤ 0.18%
• Frequency response (± 1dB): 10Hz-60000Hz
• Sensitivity level: 200mV to 6V
• Dimensions: 180x135x52mm
• Low-level (RCA) and high-level (speakers) inputs
• Optional EBC remote control (ref: EBC-1)

Características
Entrega y pago

Su historial de productos vistos